Lathem ATX User Manual download pdf (Page 6)

ATX Installation and User’s Guide

Page 1

 Start Here

Master Mode

!! IMPORTANT !!

This AirTime System is designed to provide highly accurate and

reliable time reference in your building. You must follow these

instructions or your clocks will fail to operate properly. You must

allow the transmitter to sit overnight and receive the WWVB signal

before installing your wall clocks.

FOLLOW THESE INSTRUCTIONS BEFORE INSTALLING THE WALL

CLOCKS

1. Remove the back cover of ATX and slide the Mode Selection

switch to the Master position.

2. Insert two (2) CR123A lithium batteries (provided) and replace

the back cover or connect the optional 6VDC adapter. Note: You

can not use both the batteries and the AC adapter at the same

time. (If the ATX looses power, replace the batteries or check

the optional AC adapter and reset the clock starting at step 1

above)

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Lathem ATX User Manual Page 6