Lathem PC2000 User Manual download pdf (Page 30)

PC2000/PC100 Terminal User’s Guide

Omni:Chron II

When connecting an Omni:Chron II using the SWIFT-485+, you will need a

cable with a DB9 female connector and the other end bare. The DB9

connector plugs into the R485 port at the OMC2, while the bare end of the

wire coming from DB9 pin #1 makes the positive connection to the

SWIFT-485+, and the bare end of the wire coming from DB9 pin #2 makes

the negative connection to the SWIFT-485+. Omni:Chron II’s can only

communicate at a rate of 9600 baud.

OMC2

SWIFT-485+

DB9 Pin #1

DB9 Pin #2

1 2 ... 25 26 27 28 29 30 31 32 33 34

No comments

Lathem PC2000 User Manual Page 30